SEMA-600 ICP/IEPEcard

The SEMA-600 ICPcard accepts any ICP® / IEPE compatible sensor type such as accelerometers, dynamic pressure sensors, force sensors and torque sensors. Tacho sensors and microphones are also available with the ICP® / IEPE electrical interface.

The SEMA-600 machine health analyzer may host up 6 TACHOcards.

All I/O are over voltage and EMI protected.

Features:

Industry standard fault detection GREEN-YELLOW-RED indicates normal operation – no sensor/open cable – shorted sensor cable.

On-board digitally-programmed true time-continuous 8-order anti-aliasing filters.

Software selectable 2 or 6 mA constant ICP® drive current.

ICP is a registered tradmark byPCB group Inc.SEMA-TEC continually strives to improve and update our products, as well as creating new and therfore are features, specifications and appearance subject to change without notice. SEMA-TEC AB accepts no liability for any errors in this document.

Compatible sensor types

ICP® / IEPE accelerometers
ICP® / IEPE impact hammers
ICP® / IEPE dynamic pressure sensors
ICP® / IEPE force sensors
ICP® / IEPE microphones
ICP® / IEPE torque
ICP® / IEPE tachometer

Specifications: (preliminary)

No. of channels: 1 ICP® / IEPE compatible channel per ICPcard
Sensor excitation voltage: 24 VDC
Sensor constant current: 2 / 6 mA software selectable
Input signal range: +- 7 V
Dynamic range: 96 dB
Frequency range: 0,5 Hz – 25 kHz
Anti-aliasing filter: True time-continuous digitally programmed 8-order

Connector on card

Binder 680-series, 5-way socket

Pin number and assignment

Signal / 12VDC Bias voltage
GND
GND
NC
NC